Overview of Jigging Machine
Jigging Machine ( Wash Box ) is an ideal tool for gangue removal and stream coal separation. Currently, the most popular separation technologies of jigging coal are classification system of lump coal and slack coal as well as washing process. And the grades of granularity are very different from the past. The bound of jigging separation has improved than before. For the granularity size, the upper limit has increased to 100-120mm from 50(65) mm, sometimes even 150mm.And the lower limit has achieved to 20-25mm from 10-13mm of the past, which is also the upper limit of slack coal. While the lower limit of slack coal shows a trend of dropping steadily.
Twin-bucket diaphragm Jigging Machine
Twin-bucket diaphragm Jigging Machine is divided into two styles: jig area and diaphragm area by clapboard. With a fixed sieve, our Jigging Machine is widely used in the separation of tungsten, tin, iron, manganese, chrome ore etc. What is more, it is applicable to both fine screening and coarse screening. The maximum size of mineral particles is 6-8mm, however, in some conditions, the maximum can be increased into 12mm.
Saw-tooth Wave Jigging Machine
The saw-tooth wave Jigging Machine is a key machine with the principle of gravity separation. It features high capacity, large range of separation size, good separation effects, strong adaptability to selected materials, high recovery. So it is widely applied in the non-ferrous metal mines and gold-mining vessels, especially for the separation of placer gold, tin, tungsten, lead, zinc, tantalum, niobium, iron, manganese, ferrotitanium and coal. In our Jigging Machine s, the JT4-2 and JT1.5-2 specialize in large mineral particles, and the maximum size can be expanded into 30mm. Such two types of Jigging Machine are used in the separation of barite, manganese ore, iron ore and other ores, with some outstanding advantages, such as large range of separation size, water conservation and easy maintenance.
Zenith adopt unique modularization and non-soldering structures, with two hot rolled steel side boards tightly connect with high quality cast steel frame by fine machined bolts, to make sure the durability of the jaw crusher against shock.
Working Principle of Jigging Machine
Put some water in the sink of moving sieve Jigging Machine , and the hydraulic cylinder makes a reciprocating motion around the hinge pin. Coals are laid on the sieve tray in the form of several layers. When the moving sieve rises, aqueous medium moves down relative to the material. When goes down, aqueous medium takes shape an upward flow relative to the moving sieve framework, so the mineral gradually achieves density grading. Products in light weight cross the down-flow weir and fall into the rear of lifting wheel, with the down-spouting rising, they are discharged out of the machine. As for products in heavy weight, they are also selected by this mechanism. However, fine granularities which usually leak out of the sieve are discharged from the dewatering bucket elevator. During the process of operation, the loose of minerals is decided by the quality of moving sieve.
Because the selected ores have different densities, Jigging Machine is a gravity machine and makes water as separation medium. Most of Jigging Machine s are diaphragm ones, the stroke of which can be adjusted according to the ore content. The Jigging Machine s are widely used in the gravity separation of metals, such as tin, tungsten, gold, silver, lead, zinc, tantalum, niobium, iron, manganese, ferrotitanium etc.
